Main > Project Announcements

Project #2: Pac-man from scratch

<< < (5/15) > >>

JeepMonkey:
Here is a pic to measure distance from monitor to bezel glass.

The "crest" of the monitor to the bottom of the bezel glass is 1 3/4".  The bezel glass is 1/4".

Here is a pic.

amadama:
Thanks Jeepmonkey.
I think I have figured it out based on one of the other pics posted earlier.
I have a full size template of the side panel now created in paper. This weekend I will cut a 1/4" piece of hardboard to have a (semi) permanent template.
Based on some other cabs that people have built I am going to pick up a small compressor and nail gun (on sale at Lowe's) to use for this project.
Alex

BobA:
Another link showing some cabinet dimensions and part placement

http://www.retro.co.za/arcade/cabinet.html

amadama:
Hi BobA,
Fantastic! Thanks so much. Let the cutting begin!
Alex

amadama:
Minor updates here:
Full size template on paper and then traced on the hardboard.
Also cut the hardboard to size. (pics of this to follow, need to recharge camera battery).
Color matched paint obtained.
Bought air compressor and brad nailer (very slick!!)
Alex

Navigation

[0] Message Index

[#] Next page

[*] Previous page