Main > Main Forum

Keyboard encoder for a Jukebox and power source for lit buttons

Pages: (1/2) > >>

MPTech:

Can anyone recommend a simple encoder for a Jukebox that will only use about 20 buttons total?  (no joysticks, trackballs, or spinners)  just something simple.  (I don't want to do the keyboard hack unless there is a simpler version)

I know they will all work, but I don't need the top of the line here.


Also, what can I use for a power source for lit buttons that require 14v?

http://www.happcontrols.com/pushbuttons/5400044x.htm]http://www.happcontrols.com/pushbuttons/710004tx.htm[/url
and
[url]http://www.happcontrols.com/pushbuttons/5400044x.htm

I believe the PC fan plugs are only 5v (correct?)

NickS:

Funny that you have posted this as I was about to ask the same question. My order of the Happs Low Profile Buttons arrived a couple of days ago but I have not yet figured out a solution for the 14v bulbs.

I orderd a mixture of the following:

http://www.happcontrols.com/pushbuttons/710004tx.htm
http://www.happcontrols.com/pushbuttons/5700044x.htm
http://www.happcontrols.com/pushbuttons/5700045x.htm


Which jukebox software are you using?.


AndyWarne:

An I-PAC 2 would do this, or a Mini-PAC with button harness if you want to save time with the wiring. There are many other alternatives.
You could probably use 12 volts for the lamps. Just connect into a spare PC disk power connector. The yellow wire is 12 volts, black Ground.
Andy

rockin_rick:

The 161 bulbs will work fine at 12V.  They are mainly used in auto industry, where voltages range from 11-14 Volts.  I wouldn't spend any time, money, or thought on running these at 14V rather than 12V.

I think that the mini-pac may be on sale right now, too...  There was a thread that Andy posted somewhere stating this recently.

Rick


MPTech:

The Mini-Pac sale is what triggered me to post this topic.

BUMMER!  I just ordered the Mini-Pac & Mounting feet and when I went to checkout, I was charged $14 for DHL shipping (and given no alternatives!)   I'm not in a hurry it can take a week or 2.   $14!  C'mon.  There's a dropdown selection for shipping and a "change shipping" button, but no options.

What gives!?!?!?!

Pages: (1/2) > >>

Go to full version