Main > Main Forum
What inside access do you have to your cab?
crocklobster:
I've cut my side panels, and I'm about to cut dados in the sides so that my connecting panels will actually recess into them (i.e. through dado joints). Before I do that, I have to decide where I want doors (because I won't cut dados where the door panels are). I was originally thinking the bottom front should open, but also want access to the back to be able to remove the TV.
I want great stability, and access. I've considered splitting the back panel, so the bottom half is fixed and the top half is a door (so I can get the TV out). I've also considered axing the door on the front and making the whole back piece be a door.
How have you done it?
Brax:
Umm, none of the above.
My top opens up!
;D
The cocktail people are second class citizens I tell you!! No respect! ;D
Brad Lee:
Let's see.. the marquee plexi pops out of the channel easy, thats good for the light & speakers
The coin door.. THat gives me access to my wiring blocks and ipac/optipac
The back panel is fully removable, to get at the mobo& back of the tv
And the control panel is removable so nothing is really "tight" access
paigeoliver:
I voted lower front panel, but actually the entire front of the thing opens up on both of my cabs.
SirPoonga:
For me all. I have a back door, I access the cd drive through the coin door, the cp comes off with one flick of the wrist, and the bezel slides out with the removal of one screw.