| Main > Main Forum |
| Can I swamp my speakers left/right? |
| << < (2/3) > >> |
| Herk:
leapinlew, Holy crap, I thought this would be an easy one... not so. You could use this software http://www.actualsolution.com/ but it not freeware. Do you have motherboard audio or add-on. My X-fi software has a reverse stereo option. There is no such thing in windows os, so you will have to use a software option. Herk PS. you could go mono for now until you find the real cure. control panel - sounds and audio devices - speaker setings, advanced - speaker setup drop down list - mono. |
| crashwg:
Can you solder? Even if you can't, it should be pretty easy to open up the speaker that contains the amp and just reverse the wires coming from the PC... Soldering large wires like that doesn't require any experience. |
| Tahnok:
If you're going to modify them, make sure you get the polarity correct, or things will sound quite odd. |
| Joystick Jerk:
What sound card are they plugged into? Most Creative cards include a "Swap L/R Audio Channels" in their speaker setup panel. |
| ChadTower:
--- Quote from: crashwg on May 20, 2007, 02:12:08 pm ---Can you solder? Even if you can't, it should be pretty easy to open up the speaker that contains the amp and just reverse the wires coming from the PC... Soldering large wires like that doesn't require any experience. --- End quote --- Hell, with stable speaker wires, he could just wrap them tight and tape them down if he can't solder at all. Worst case, wrap them nicely around the tab and hot glue the suckers. |
| Navigation |
| Message Index |
| Next page |
| Previous page |