Main > Main Forum
8 ohm speakers to PC
(1/2) > >>
urbecrisch:
I'm maming a CAB that originally came with 2 8ohm speakers which were connected to the PCB board.  Since I've removed the PCB board and will be using a PC to rum Mame:

Is it possible to connect the 2 8ohm speakers to my PC audio?

If so, how?

Thanks.
BobA:
If you have an  PC with a sound card with an amp built in you can connect direct but with most on board sound you will require an audio amp.

 
urbecrisch:
So if my audio inputs are on board to the MB I don't have a built in amp.  Are there any audio amps that you can suggest (cheap) that I can use for my PC?
Zebidee:
Try an old stereo system amplifier.
BobA:
There are many options available

The prefered method is to make your own from the insides of a 2.0 or 2.1 pc speaker set.
or you can

Use a home stereo amp from thrift shop.
or
diy
kit
Kit
Buy premade
Navigation
Message Index
Next page

Go to full version