| Main > Main Forum |
| CP Laminate Opinion |
| << < (2/4) > >> |
| miles2912:
I would make the sides of the CP the same as the rest of the cab. Whatever color you paint the cab paint the CP sides. A good paint job will be more then enough to protect the cp. On the other hand if the laminate is cheap enough why not order it up and try. Just temp mount it and if you don't like it you can always remove the stuff. Don |
| namedos:
I used laminate on the sides of the cab and I used the material from parts express on the sides of the control panel. I decided to not use laminate on the control panel so the edges would be smoother. Very easy to install and cuts cleanly with a razor blade. It has been on my cab for a couple of years now with a lot of teenage boys playing it and it is still in good shape. |
| urbecrisch:
namedos, any chance you can post a PIC of your CAB/CP? Also, where did you get your CAB laminate from? Cheers! |
| namedos:
I bought the laminate from Lowes. Used three different colors. They can special order it for you. Runs about $50 per sheet. Take a look at what size you need as there are several different sizes they can get for you. Is there anything specific you want to see with the picture? I don't have any sitting around. |
| urbecrisch:
--- Quote from: namedos on May 08, 2007, 11:08:32 pm ---Is there anything specific you want to see with the picture? I don't have any sitting around. --- End quote --- No, just wanted to see what it looks like. So you had to buy 3 sheets of laminate ($50 ea.) for a total of $150? |
| Navigation |
| Message Index |
| Next page |
| Previous page |