| Main > Main Forum |
| CP Laminate Opinion |
| << < (3/4) > >> |
| namedos:
They run in 4 x 8 sheets normally but you can buy other sizes. I built the UA II and chose to go with different colors for the upper side, lower side and front. You will need a little bit of extra space on each side to rough fit the laminate. Maybe a couple inches on each side. |
| CoryC:
I used Parts Express sticky stuff on the side of my CP box. It looks good, but you have to apply it slowly to make sure it's on tightly. It's a bit painful wrapping oddly shaped things (like my CP box). For the rest i will use normal plastic laminate. It also has ugly seams underneath and inside, but no one will see that. |
| urbecrisch:
CoryC, looking good. Are you laminating your CAB too or just painting it? |
| CoryC:
I'm going to use normal plastic laminate (adhesive & roller kind) for the cab. I didn't use it on the CP box as it was oddly shaped and i was worried about it being too fiddly. |
| urbecrisch:
CoryC, on your CP, did you just stick on the laminate and then use a utility knife to cut the shape of the CP? How did you hide the seams around the corners? |
| Navigation |
| Message Index |
| Next page |
| Previous page |