Main > Monitor/Video Forum
Soft-15KHz - slim new tool for 15KHz on normal vga cards
BLASTEROO:
Hi guys,
I used to have a radeon 9600 pro agp installed on a P4 and it work fine, but I was forced to move to PCI-E due to a mobo failure.
I'm trying to use a RADEON HD 2400PRO = asus eah 2400 pro
http://www.ebay.com/ctg/ASUS-ATI-Radeon-HD-2400PRO-EAH2400pro-HTP-256-256-MB-DDR2-SDRAM-PCI-Express-x16-Graphics-adapter-/73799324
but I can't get it to work with soft15khz.
Anyone using or tested this card? I'm about to call it quits... :(
All help appreciated
B.
adder:
--- Quote from: BLASTEROO ---I'm trying to use a RADEON HD 2400PRO = asus eah 2400 pro
--- End quote ---
hmm, should work, as it's on this list:
http://forum.arcadecontrols.com/index.php?topic=119740.0
MonMotha:
HD2400 Pro definitely works. You have to use an older driver release, IIRC. The one I have kicking around is from October, 2008, I think.
Also bear in mind that most of these have two outputs. Both just show up as "Radeon HD2400 Pro". The first one in the list is usually, but not guaranteed to be, the DVI output. The second one is (again usually) the analog VGA/RGB output.
BLASTEROO:
thanks for the replies, that's good news!
9600 pro was so easy to configure, almost turn key, while hd 2400 pro as been a total headache.
Monmotha,
Any chance you could send me the drivers you're using for hd 2400 pro? Via we transfer maybe?
I'm using win xp 32 bits, currently.
B.
DeLuSioNal29:
Hi all,
I'm jumping back into setting up this program again on my arcade machine, since my original hard drive failed. I'm using a different OS this time around (64 bit XP) and I'm having issues with Soft 15kHz. edit: Got it working! Soft15khz ver: 0.1.0.48 works. Ver: 0.1.51 would not work.
Here's my card that I took a snap of and SailorSat posted as working: http://community.arcadeinfo.de/showthread.php?7925-Getestete-Grafikkarten&p=99609&viewfull=1#post99609
I used to have:
Windows XP (32 bit)
ATI Catalyst 9.2 (32 bit)
Soft15khz ver: 0.1.0.48
Now I have:
Windows XP (64 bit)
ATI Catalyst 9.2 (64 bit)
Edit: Soft15khz ver: 0.1.0.48 was the version that finally worked. The newer version 0.1.51 did not.
So the big question is: Does this work with the 64 bit version of XP? edit: It sure does!
Also: I only have 1 video card and I see 2 radio buttons when I run the program. Which one do I use? One or the other or both?edit: Got it working using the first radio button. The 2nd button is for my DVI port, which I'm not using so I left it alone. Each radio button is for each port on the card. i.e: 1st one is for the D-Sub (vga) port, 2nd is for the DVI port, etc .
Last but not least: I can't recall the name of this program, but it allowed the user to COMPLETELY uninstall all graphics drivers on your PC. Anyone remember the name of it? edit: Still can't remember it, but I also found another handy program called Reforce which allows you to add or delete resolutions from the windows driver on the fly.
Thanks in advance!
DeLuSioNaL29