| Main > Main Forum |
| Painting Tip Needed - How to paint a straight line! |
| << < (6/6) |
| leapinlew:
http://forum.arcadecontrols.com/index.php?topic=53105.0 Here is my buddy Bleems situation - same problem. |
| javeryh:
--- Quote from: ChadTower on May 01, 2007, 04:23:04 pm --- Sounds like the first coat didn't bind, and if that happens, none of the rest will. They'll bind to each other but not the object if the first coat will come right up. What did you prime with and did the primer come up too? --- End quote --- The primer did NOT come up but I did sand the primer smooth using 220 grit paper - that might have been my mistake since the smoother the surface the harder it is to get something to stick... |
| ChadTower:
220 isn't going to make it smooth enough for anything like that to happen... the only thing I could think of there is not getting the sanded off dust off the surface, maybe, or using a primer that doesn't play well with the paint. The primer is there specifically to give the paint a good bonding surface. |
| Navigation |
| Message Index |
| Previous page |