| Main > Main Forum |
| Control Panel Wiring Help |
| (1/3) > >> |
| Jedirampage:
Hi all, I'm about to start wiring my control panel however i need still need to buy wire. What is the reccomended gauge wire for standard pushbottons? Also from whom would you recomend i buy from ? Also looking for .187 quick dissconnects Thanks for your help |
| shardian:
The wiring found in cat5 networking cable works just fine for buttons.You can get you wire and disconnects. from www.groovygamegear.com, or divemaster in the bst forum. You can also get them from Lowes, but it is hard to find the proper quick disconnects in their own package. |
| Jedirampage:
Also what keyboard encoder would anyone reccomend for 4 players, i bought a USB trackball from happ so i do not need it to have a trackball interface |
| vidmouse:
I'm currently building my first project, and it's a 4p cabinet. Using the Ultimarc I-PAC 4 --- really made things easy. For quick connects, search on Ebay for "187 connector" it comes up with several options in 100+ct quantities, fairly decent price. As far as wire gauge goes, I don't think it really matters as long as your connector gauge matches your wire gauge... or if you are stuffing two wires into one connector to daisy-chain, you are one-size up. |
| Hawk Daddy:
For my wires I used the old harness out of my MERCS jamma cabinet. It had more then enough wires to account for all the buttons. And also it looks more original. Hawk |
| Navigation |
| Message Index |
| Next page |