Main > Main Forum
Quick checklist
(1/2) > >>
dcsgguy:
Hey all,

I'm sorry if this exists somewhere else but I couldn't find anything.  Basically I am ready to build my CP and wire it up.  My checklist of things to buy just for the CP and the wires include for a one person CP.  If you all remember I am working with a Tempest Cab and it's control panel:

(2) Ultrastick 360 joysticks  (2nd joystick is for Smash Tv, Robotrom, etc...)
(18)  Happ Horitzontal pushbuttons
(1) 2 1/4" trackball
(1) Oscar M3 spinner
(1) Jpac interface
(1) Ipac interface

Is that all I need to get this thing wired up to the computer?  Do I need to buy wire harnesses or something or do these items come with those?  I'd like to buy everything in one shot.

Thanks for your time.
Jeff AMN:
Somebody back this up for me, but couldn't he get a Mini-Pac to handle all of his encoding?

And to the original poster, have you checked out the Turbo Twist 2 spinner from GroovyGameGear?
dcsgguy:
I have not looked into that spinner.  Why are you recommending that one.  I also forgot about the minipac.  Could it handle everything so I wouldn't have to buy 2 seperate encoders.
horseboy:
It doesn't sound like you are plugging into a jamma cab, so you don't need a Jpac. You don't mention an optical encoder in there, but you would need one to hook up the trackball and spinner. A minipac should do fine.
moriartyds:

--- Quote from: horseboy on April 19, 2007, 03:12:56 pm --- You don't mention an optical encoder in there, but you would need one to hook up the trackball and spinner. A minipac should do fine.

--- End quote ---

Not sure which trackball and spinner you're going with, but if it has a USB/PS2 connector (like say the groovy gamer spinner) you won't need the optical encoder. 
Navigation
Message Index
Next page

Go to full version