| Main > Main Forum |
| 2 Questions with pictures |
| (1/1) |
| urbecrisch:
I'll get right to the nitty gritty. 1. What is this (PIC 1) and is it important to use? 2. How would I make this angle cut (PIC 2) on my CP? Cheers! |
| destructor:
1. Door switch. If door is open no power to PCB, or power is for test game mode. You can remove this and connect wires from this switch. |
| NoOne=NBA=:
--- Quote from: urbecrisch on April 15, 2007, 11:54:04 pm ---2. How would I make this angle cut (PIC 2) on my CP? --- End quote --- With the board stood on end on a table saw. Set the rip fence 1/2" or so off the blade, and put the blade at the right angle. You'll probably need to remove the blade guard to do it, so be careful. Alternately, you could use a belt sander to do it. |
| Navigation |
| Message Index |