| Main > Main Forum |
| Somebody dimensioned their star wars cockpit |
| << < (10/52) > >> |
| rovingmind:
I havn't attempted contacting him yet although he has a completely mesmerizing arcade. I so want to go there and waste quarters by the bucketful. I've been trying to contact people who have one that needs repair or have one that is not in an arcade setting. I figured they would have the best chance of being able to get dimensions. --- Quote from: shorthair on April 11, 2007, 04:26:35 pm ---You might try peter hirschberg: http://www.peterhirschberg.com/arcade/gameroom.htm --- End quote --- |
| rovingmind:
Photos wanted in as high a resolution as possible straight on photo of the two parts that make up the side individually with a yardstick either beside them or laying on them, it doesn't matter if the stick is covering the artwork because this is for dimensioning, (although the more photos of the artwork the better) same with the front and back of side of the canopy piece same with the front side of the panel under the bezel, photo of the coindoor side panel with its dimensions from the edge. If we can get the panel measurements already discussed we can get a working set of plans for this made up for all of us to use. |
| CheffoJeffo:
Props again to modessit -- that's a nice thing to do! :cheers: |
| rovingmind:
I wouldn't be able to deliver a full scale example to your house but i can send you a finished file in the end to print out cutting templates with. For my own purposes my plan is to have a printable cutting template for the panels to cut out of luan, to use as a guide for my router --- Quote from: polaris on April 11, 2007, 04:26:01 pm ---new thread , wiki , main site under cabinet plans, a full scale example delivered to my house, all good --- End quote --- |
| rovingmind:
--- Quote from: CheffoJeffo on April 11, 2007, 05:28:36 pm ---Props again to modessit -- that's a nice thing to do! :cheers: --- End quote --- :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |