Main > Main Forum
Somebody dimensioned their star wars cockpit
rovingmind:
--- Quote from: rovingmind on May 07, 2007, 04:03:04 pm ---
--- Quote from: scotthh on May 07, 2007, 10:31:35 am ---Here's a cockpit on ebay. The seller in Longmont, Colorado (not me) says he has "lots of high resolution pictures I can send upon request"
--- End quote ---
and did you request?
--- End quote ---
If anybody else is interested I requested his higher resolution photos. not willing to photo post them since they aren't mine but i'll zip and email to those interested in this project for reference material
rovingmind:
Pics are up. Dimensions are getting taken and posted.
For those worried about it. The cutt angles of the flat panels for the outside can be calculated based on their position in the cabinet. Moddesitt does not need to waste time by taking a protractor to them. Reference photos currently available of the various angles show the panel overlaps.
For those concerened with the radiused edges a proper radius will be given based upon what most closely matches when plotted out full sized, compared to original photos and drawn in with a french curve. if you don't know what a french curve is don't worry about it.
ChadTower:
Awesome. This project rules.
What intrigues me the most is those beveled overlaid pieces on the sides.
rovingmind:
heh ROUTER woot!!!
ChadTower:
Oh I know that, but there are a lot of measurements to take there, and the inner corners on those bevels just add to the work I'd assume. Would you do those in four pieces and join them or just bevel out a single piece and chisel out the corners?