The majority of the outer panels are flat pieces and from interior shots they are not routed into the large side panels. If the outside edges were measured and written on a photo of that panel along with the amount each corner was inset from the outer edge, plans for the entire cabinet could be drawn up accurately with autocad without dissassembly the cabinet.
the only panel that would need detailed measurement and parts removed to do so would be the one that the bezel goes over, along with its depth from the cockpit edge.
The seats are just plain rectangles to measure and insets would be fine for that. All the internal braces could be figured after the panels were drawn in.
If you were able to get these measurements, I can start making an actual cab plan in autocad.
The bevel angles for the flat panels can all be calculated.
That would leave just the plexiglass as the hard part to get right.
The only part that I would like to see photographed individually and measured is the inside of the canopy rib, but that could be calculated from its contact with the other panels if the cabinet isn't getting taken that far apart.
Any help you are able to give will be greatly appreciated and the drawings will get posted to Jakobuds site if he wants them, or mine for free download.
I will be doing a major repair job on a Star Wars Cockpit (it's beautiful, too) that a customer owns. He had about 40 games in a warehouse that I do about 4 every couple weeks and take them to his software company's breakroom.
Don't know how long I'll have the game - and I won't be able to take it apart - but I might be able to take some pics and overlay measurements on them. You can check out the Joust cocktail pics I've done to see how I lay out the measurements.
Not sure of the timeframe, but will be less than a month before I get it in the shop. Doing a Tempest, Tron, Spyhunter, and Space Panic for him at the moment. They're hurt bad.
So - it'll take a few weeks but it'll happen. I'll try inside pics and measurements, too, if I can. Pics are easy. Measuring, then editing photos takes a while.