| Main > Main Forum |
| Picked up a Pac-Man cab to restore (it's currently a Bubble Bobble) *Pics* |
| (1/5) > >> |
| Jeff AMN:
Ok guys, I was able to get this cab, with a working Bubble Bobble for $200. It's a pretty good deal since the monitor is in great shape. So, here's a few pics. Here's the only damage I'll have to patch. I'd like to convert this to a Ms. Pac-Man, but with this being a Pac-Man cab, it's actually a bit smaller, right? The structure of the cab is solid, it's just going to need a lot of work to get all pretty again and in its original form. |
| modessitt:
I can't remember, but I think the Pac-man marquee is a little bigger than the Ms. Pac marquee, so you may want to consider that also if you plan to use an original marquee. If you're replacing the art, reproduction Ms. Pac art will be a very tight fit on the cab, as it's not only shorter by about 1 1/2", but it might be deeper by about the same. Check out Jakobud's plans for both cabs (does he have plans for the original Pac on there?) and you'll be able to see if there are any size differences that would keep it from working like you want. Congrats on getting the cab! |
| fjl:
Isn't the pac-man monitor a vertical monitor? |
| modessitt:
Yeah, but that's easy to change on the pac cabs... |
| Jeff AMN:
Ok, so the cab didn't come with keys. If I order a replacement key, it will fit any Pac-Man cab, right? They're all standard, aren't they? |
| Navigation |
| Message Index |
| Next page |