| Main > Main Forum |
| Golden tee fore 2005 to mame |
| << < (3/4) > >> |
| Buddabing:
I would suggest not modding the cabinet, just make a new control panel. If you remove the old control panel and leave the original wiring intact, you will be able to reverse any changes made if you are able to sell the machine. Easier said than done if you want to add joysticks and more buttons, though. The scrolling sign would be really cool if you were able to control that with a serial or parallel port connection. Good luck with your project. |
| Kaytrim:
Open up the case and look at the back side of your scrolling sign. There should be some identifying sticker with a model number. Google that and you should come up with some good information. I am guessing that the message is either preprogrammed into the sign or controlled by the Golden Tee boards. The CP would be a nice candidate for swappable panels. Plenty of space and you can keep the original CP for converting back later if you want. |
| Marky_1979:
I like that Idea Kaytrim I think I might just make my own CP and replace the current one leaving it ready to swop back if needed I was selling it for £350 which is what I paid for it when I bought it |
| javeryh:
Any chance you could post some detailed measurements of that thing? I love the layout and I agree it would be a very cool MAME cab... |
| Marky_1979:
65 " in height by 25" wide not sure if thats the measurements you were after if not let me know also added pics of inside machine wires and boards etc confusing stuff |
| Navigation |
| Message Index |
| Next page |
| Previous page |