Main > Main Forum
trackball mount confusion
<< < (2/2)
scotthh:
In this thread, divemaster mentions that "the highlip mounts have a bigger footprint than the regular 3" mounts". Does anyone know the dimensions of the highlip (Golden Tee) mount?

Edited to clean up links.
u_rebelscum:

--- Quote from: scotthh on April 05, 2007, 09:09:37 am ---In this thread, divemaster mentions that "the highlip mounts have a bigger footprint than the regular 3" mounts". Does anyone know the dimensions of the highlip (Golden Tee) mount?

--- End quote ---

There's a little more to it, as there is no "highlip mounting kit".

The highlip trackball is the same as the normal TB.  The basic 3" kit is 6" square with 3" center whole, and works with both the normal and the highlip models.

The highball has is bigger mounting plate.  The highball kit 6.5" square with a 3.25" center hole.

The heavy duty mounting kit you linked is also bigger than the basic plate.  IIRC (and I don't have one of these myself so don't quote me) this is 6.5" square with 3" center hole.
edit: see below for actual size (thanks scott)
scotthh:
I just measured a 55-0321-00 Heavy-duty 3” Trackball Mounting Kit aka Golden Tee PGA Tour Version trackball mounting kit). The top plate is 7 3/8" square and 1/16" thick. This almost jibes with the template on page 3 of the Global VR Golf Control Panel Conversion manual, which says the plate is 7 7/16" square. But who's going to quibble over a sixteenth?

Navigation
Message Index
Previous page

Go to full version