| Main > Main Forum |
| Altered Beast!!! |
| << < (15/19) > >> |
| SavannahLion:
It's standard for "worst case scenarios" to simply go in and wipe everything out and start over fresh. One of the driving reasons why I went out and bought a second hard drive. If you make it a habit to always put your data on the second drive, it has a far better chance of surviving a meltdown. It's only until recently that I grew lazy and opted not to create a similar configuration with the laptop. I suppose I'll pay for that one day. ::) I did, however, buy an external drive enclosure and use it to dump ridiculously large files. Take it from someone whose tried all sorts of backup methods. Save up a little cash and buy a second hard drive. To make things simpler, buy an external USB 2 drive. It's probably not any consolation, but I used to get BSoD's all the time. During the Windows 95/98 years I was writing some custom software for myself involving some convoluted memory management and I got an error screen that looked like the one below. Wasn't fun trying to figure that one out. |
| david656:
:-O !!!!!!!! Windows 98se is THE BEST ! has to be about the most usable operating system from widoze i upgraded ny arcade PC to Me because i remember having it on a pc from like PC World and remebered it played all my nice games 'ok' turns on all the music clicks starts DONK ! so scrapped Me!!! and here is a dumb reply from our local 'timber supplies' ____________________________________________________________ Thank you for the enquiry. Prices are as follows 18mm Mdf £19.01 per sheet 18mm Hardwood Ply £28.55 per sheet 50p per cut PRICES ARE SUBJECT TO VAT. Regards Sacha -----Original Message----- From: David Little [mailto:davidlittle_15@hotmail.co.uk] Sent: 17 May 2007 23:39 To: sales@timbersupplies.co.uk Subject: Help on sizes hi i will over the next fre weeks being doing a project involving 3/4" plywood/MDF. obvioulsy everything is metric now but it HAS to be 3/4 inch. would you be able to cut 2 sheets of 3/4 Ply/MDF and at what sort of sizes and prices thanks _____________________________________________________________________________ work it out on a caculator 0.75" x 2.54cm x 10 ======== 19.05mm ! NOT 18 !!!!!!!!!!!!! ARGHHHHH you would think i made it clear really but obviously NOT ! would like some comments on this |
| shardian:
What the hell language are you speaking?!? |
| david656:
ok yeh there are a lot of mistakes there but you get the gist of it |
| shardian:
No, not really. I just get a headache. |
| Navigation |
| Message Index |
| Next page |
| Previous page |