| Main > Main Forum |
| MAME INTO CABARET CAB (PAIN IN THE ASS) |
| (1/1) |
| hayabusa_fmw:
hey guys Im trying to finish up my mame cab it's pretty a pain in the ass since starting the project first the monitor that was inside was ''a 13'' so im putting a 17'' pc monitor... so i had to cut a hole into the door & recover it with an other peice of wood but the other side..... so it looks ''ugly but still you never look at a cab's behind....(don't we?) haha nayways my question is the following How can i put brackets for the monitor to hold... & be straight I tryed drillings some little L brackets it didn't do the job now the monitor is holding by some Wood on top & on the bottom i couldn't put a long peice of wood so i put only 2 squares of wood so it can slide in & hold there.... everything is bolted with washers... but it sucks... i don't like my project so far... but i guess i could live with it if the monitor could be straight straight dead center... |
| SithMaster:
could you take a pic of the area? |
| Crowquill:
Pics would definitely help. Do you want it stable enough to just sit in the cab correctly or do you want the monitor permanantly bolted in there? |
| hayabusa_fmw:
I want the monitor to never move again i don't see the point of taking it out once the ''cab finished'' but now i drilled too much time on one of the side so the screw is loose on the bracket so i tryed putting a bigger gauge of screw wich didn't worked really so if i shake it a little it can move a tiny bit but ppicky as i am it bothers me so much to know that .. :what i did ...'' i took Flat backets & put them on all 4 corners of the monitor & then i took a wrench & put them secured there & put peices of wood to slide it in but what i would like is do a cleaner job & so it's VERY hardly bolted into the cab & straight pics : im not happy of the job i did but not at all . i would like to find a way to make it cleaner & very solid The backdoor part i don't mind since no one will see it even if i didn't have a back door ... thanks!!! |
| Navigation |
| Message Index |