| Main > Main Forum |
| quick check before I do some wiring, just a quick question |
| << < (2/2) |
| Jeff AMN:
I think he's past the mockup stage, right? Aren't you ready to start wiring today? |
| struby:
yes, I have been much criticized as a non-mocker, I draw, drill and put stuff in the holes, ez pz, i'll post a pic of my cp when i'm done, it's painted black plexi over plywood 4p 48 inches wide 22 inches or so deep, buttons from pelican controllers I like them. |
| Kaytrim:
Been there, Done that, got the t-shirt. I was bit by it once. Made my CP box and panel 6" too short. :hissy: Had to slice it up and add an extension so I didn't waste a good sized piece of MDF. In future I will mock up my stuff so I don't have that happen again. >:( |
| Tiger-Heli:
You really can't screw this one up no matter how you wire it. On my panel, I use 4 5 6 1 2 3 7 I play mostly classic games, so the bottom row buttons allow me to not have to reach over buttons to use them. If I ever played MK or SF, I could remap buttons in MAME to use the upper row as 1-3 and the lower as 4-6, and for 4-button Neo-Geo games, I would remap in MAME so 7-1-2-3 was 1-2-3-4. That was my point initially, you are mainly using MAME and are using an I-PAC, so if you don't like what you initially choose, either re-map MAME or re-program the I-PAC and it's changed to what you prefer. |
| Navigation |
| Message Index |
| Previous page |