Main > Main Forum
Pink Coin Inserts? (Coin Reject Buttons)
<< < (12/13) > >>
ChadTower:

It would also make the plastic really brittle in the process... more damage than good.
polaris:

--- Quote from: ChadTower on March 31, 2007, 04:49:19 pm ---
It would also make the plastic really brittle in the process... more damage than good.

--- End quote ---
cheers, i forgot to mention that.  :D ,and that itd take about 5 years in the sun or a planet destroying amount of electricity for a sunbed , but you americans dont worry bout that.
thats a joke before anyone has a go
javeryh:
OK, I'm bumping up this thread because I've decided to BYOCRB.  I'm going to make a mold of one of the ones I have and try to pour something that will harden into the proper shape (and be pink). Some questions:

1.  What's the best way to make a mold?  Plaster?
2.  What's the best stuff to use for the plastic?  I want it to be clear so I can dye it (or maybe use a pink LED but I'd prefer dye).

Any tips would be great - I've never done something like this before but if it works I'll at least feel like I have something original on my cabinet...
Kaytrim:
Send a PM off to Donkey_Kong or Pinewood_Princess.  They do casting for their carvings.

TTFN :cheers:
Kaytirm
javeryh:
Good call.  I'll do that right now.   :cheers:
Navigation
Message Index
Next page
Previous page

Go to full version