Main > Main Forum
monitor bezel/surround?
(1/2) > >>
squirrellydw:
Does anyone know where I can get the black piece that goes around the monitor to hide it and make it look better.  Looking for one that will work with the 27" BillLabs BL27CB0P
moriartyds:
If you're just looking for a bezel, you can get one from Happs controls (not sure on your exact size).  You can also make your own.  Check out the 'Read Here First / FAQ' sticky at the top of this forum, and see the link on making a bezel for $2.00.
Chris G:
I would recommend making your own.  Unless something's changed recently, Happs' are ridiculously expensive with shipping...
Moose13:
OK, I've read the post on making your own $2 bezel.

I'm in the process of gathering all my cab components. I already have a Toshiba 27" TV, with power return. So my questions is this:
Do I really need a bezel?
If I simply paint the case black, then cover the monitor/TV area with plexi (or lucite or graylite14...) and apply a bezel with graphics and instructions (i.e. from Mamemarquee) to the plexi, or behind the plexi (not sure which way is best), will the look be any different with or without the paper (or plastic) bezel?   :dunno
(+_+):
Putting your glass/plexi cover up against the TV will probably do the trick if the monitor frame is nice and flat. I did it that way and it looks fine.
Navigation
Message Index
Next page

Go to full version