| Main > Main Forum |
| Multiple USB Mouse (mice) issue |
| << < (3/3) |
| RandyT:
--- Quote from: shatter on March 28, 2007, 11:12:20 pm ---I have a TurboTwist2 spinner and ElectricICE trackball from Randy and didn't think about getting different USB IDs assigned to the devices but I found it easy enough for my control panel to do exactly as Randy suggested. I assigned the trackball to the x and y axis and the spinner to the z access. In my custom controller config I set the spinner controls as MOUSE2_Z and MOUSE3_Z and the same for the trackball (replace Z with appropriate Xs and Ys). The result being, no matter which mouse_id my computer decides to assign to the spinner or trackball, they always work perfectly on my games. --- End quote --- It sounds like you have things set up to be as trouble-free as possible, but I just wanted to state that the you don't need to worry about USB ID's between the TT2 and the EI Trackball. They both have unique ID's so you shouldn't see any type of contention there. If you ordered 2 TT2's or 2 EI Trackballs, then you would need to make sure 2 distinct ID's were ordered for the identical controls. RandyT |
| Wade007:
This thread is way old, but I thought I'd post a very likely solution to the original issue here in case anyone else wanders by. ControllerRemap Utility: http://forum.arcadecontrols.com/index.php/topic,108767.0.html |
| Navigation |
| Message Index |
| Previous page |