Main > Software Forum
Atomic FE & Joystick
<< < (2/4) > >>
youki:
I don't know to much about the 360 for now.

But it is in my plan to support it as well. 
shorthair:
Sorta assumed one or the other would run - vs both simultaneously.  Have look through Ultimarc, or ask Andy on that one.
SodaPopinksi:
You're right Extreme8, I just checked the site again, it can be set to Output mode with a harness to connect to an encoder and connected to USB for mapping at the same time! So it can work that way  :cheers: I thought it had to be set up as one or the other.
Kaytrim:
It would still be nice to have this implemented.  I will have a Midway 49-way connected to a GPWiz49 as my main joystick.  Even though there is support for the GPWiz49 it is still not recognized as the main joystick without JoyToKey.  I prefer to have as little overhead as possible while having a nice front end.
youki:
Atomic has a basic support for PC Joystick in Front End mode . The problem is it is not configurable and limited.  I know it works with the GP49Wiz.   
What did you choose for Front End mode for the GP49Wiz in AtomicManager?

Are you sure you GP49Wiz is detected as a joystick in windows?
Navigation
Message Index
Next page
Previous page

Go to full version