| Main > Software Forum |
| Atomic FE & Joystick |
| << < (3/4) > >> |
| Kaytrim:
I tested the stick in windows before I did anything else and it does work. I am not in front of my cab right now but I believe that I chose 4 way for the frond end mode. I'll check tonight if I have the time. I may not be able to get on this until after April 15th. I still have to do my Income Taxes. TTFN :cheers: Kaytrim |
| youki:
Try to put mode 1 or 2 (raw mode or progressive mode). And on the option tab of AtomicManager. Check the checkbox : Analogic mode for joystick (in this mode more you press, faster the list goes) Another thing, the Joystick must detected as Joystick 1 ... |
| Kaytrim:
--- Quote from: youki on March 28, 2007, 01:45:40 pm ---Another thing, the Joystick must detected as Joystick 1 ... --- End quote --- That is where the rub is. My 49-way is detected as joystick 2. I also have a GPWiz for everything else. Looks like I am going to have to do some rewiring sooner that I thought. I have a KeyWiz so I can swap cards without too much difficulty. It is just taking the time to do it. Thanks Youki. TTFN :cheers: Kaytrim |
| Kaytrim:
--- Quote from: youki on March 28, 2007, 01:45:40 pm ---Try to put mode 1 or 2 (raw mode or progressive mode). And on the option tab of AtomicManager. Check the checkbox : Analogic mode for joystick (in this mode more you press, faster the list goes) Another thing, the Joystick must detected as Joystick 1 ... --- End quote --- I have everything wired to the GPWiz49 and it is the only joystick detected. I have set Atomic for analog mode and set the GPWiz49 mode to 1. I can use the stick in MAME but it doesn't work in the front end. Any more words of wisdom??? TTFN :cheers: Kaytrim |
| youki:
--- Quote ---it is the only joystick detected --- End quote --- Detected as Joystick #1 ??? Just in case try in another mode for he GPWiz mode. (like the 8ways)... just to be sure. |
| Navigation |
| Message Index |
| Next page |
| Previous page |