Main > Buy/Sell/Trade - non-retail
WANTED: Sanyo 20EZ Inverter Board
(1/2) > >>
FrizzleFried:
I am looking for a working Sanyo 20EZ inverter board.  If you have one or you know where i can buy one,  please let me know!

Thanks!

CheffoJeffo:
I think ArcadeShop had them.
FrizzleFried:
Cheffo,

I have dropped them an email,  however,  the one I see on their site is a board that allows Nintendo games to be played on standard (Electrohome, WG, etc) monitors.  I will be running a JAMMA board on a Sanyo 20EZ monitor.

FrizzleFried:
All I can tell  you is that I have a DK Jr board WITHOUT the inverter board and it runs perfectly fine in the Sanyo 20EZ hooked directly to the chassis.  I was told that I would need the inverter board if I wanted to run a JAMMA board in the cabinet.  I have read that the Sanyo 20EZ is modified to run inverted for the DKJR and DK boards and that an Inverter Board is necessary to run non-inverted boards....

To be clear we are talking about negitive colors, etc...not rotation.  The person at Mikes arcade I have been communicating with keeps talking about rotation and is confusing the hell out of me.

If the DKJR plugs right in to the chassis and works fine (all stock BTW),  that says to me that I am going to need to get the inverter board,  to run this with a JAMMA board... right?

FrizzleFried:
There is a way to modify the chassis with a kit from Zanen...but i'd really like to find the inverter board to keep the compatibility with Nintendo boards just in case...

Navigation
Message Index
Next page

Go to full version