Main > Main Forum
Happ perfect 360 compatability
(1/2) > >>
langdoguk:
Hi there , probably been asked before (sorry ) but how easy is it to rig up the happ perfect 360 joysticks to an ultimarc minipac , is there any soldering or configuration required as I'm very basic in my knowledge . I've used an Ipac2 with j-stick and it works right out of the box , but I'm starting to build my upright cab and these sound pretty good , are they an option for a novice?

cheers  :cheers:
Havok:
The P360's are fully compatible - it fact, they are easier to wire up as you only have a 5v, ground, and then labelled - up, down, left and right. They're on my fighter panel, and I love em. Do a search for Kowal's acutators, it's a mod you really should get as well...
langdoguk:
Thanks , I did a search and they sounded great with the Kowal's acutators upgrade , I was just a bit worried as to how to wire them up as the j-stick just has the 4 micro-switches , and I'm not sure what to use from the minipac wiring harness (think it would have 4 wires left,right, up +down), also I read a lot of people messing about with joystick controls in front ends etc ( which would be too advanced for me).
Are they pretty much plug n play with Atomic FE , which I'm going to use?
Havok:
It's basically the same as any other joystick, except you need to wire +5volts to them. You can tap directly from the mini-pac, from J2: there are three different 5volt outputs.

As far as plug and play joystick control with Atomic, just make sure to wire your player 1 joystick according to the mini-pac wiring, and Atomic will see it.
paigeoliver:
Another nice thing about p-360s is that you can put Wico handles on them. I have mine set up that way.
Navigation
Message Index
Next page

Go to full version