Main > Main Forum
HotRod owners.... Customize!
OSCAR:
I put together a page detailing the addition of the Joystick Restrictors, a plateless OSCAR Model 1, and some additional pushbuttons to a HotRod SE that are wired to the HotRod encoder.
During this customization, I found an easy way to install and use the Joystick Restrictors without the mounting plate. Check it out at www.oscarcontrols.com under the "Extras/Links" page.
Finally, for those waiting.... the new restrictors will be out very shortly. The target date is April 8th, but they may be a little early... :)
Jakobud:
Very cool. I'm glad to see that I can use the restrictor plates without the mounting plate. I have 2 questions:
1. Are you going to consider making available the restrictor plates available in the same black color as you offer the mounting plate. I think that it would match many people's cabinets better than stainless steel and I think that not everyone wants to have to paint and finish it themselves if they got the primed one.
2. Now, you are coming out with some other restritors right? Galaga 2 way? And Q Bert I think I read? Are these restrictors going to use the same holes as the 4 way restrictor? I hope so!
Thanks for your great contributions, Oscar!
Jakobud
OSCAR:
Hey Jakobud... thanks for the comments! Here's some clarifications:
1.) There is absolutely no reason that I can't offer the restrictors in the dimpled black finish. My original thinking was to create a contrast between the black mounting plate and the restrictors, and the stainless finish does create a nice contrast. I'll update the order form to include a black finish, and also to order the mounting plate as a "blank" such as I used on the HotRod.
2.) The 2 new restrictors are a diagonal style (Q*Bert, Congo Bongo) and a rotating 2-way (horizontal and vertical with the same set). They will use the same mounting pattern as the 4-way's so prior customers can use the new restrictors, too.
SirPoonga:
--- Quote ---I put together a page detailing the addition of the Joystick Restrictors, a plateless OSCAR Model 1, and some additional pushbuttons to a HotRod SE that are wired to the HotRod encoder.
During this customization, I found an easy way to install and use the Joystick Restrictors without the mounting plate.
--- End quote ---
OSCAR:
--- Quote ---
Did you wire the tab and esc into their controller?
--- End quote ---
Yes. The 6 unused inputs on the HotRod encoder are mapped to: Esc, Enter, Tab, F1, F2, P(ause). I wired the 2 new buttons to the corresponding input on the encoder and spliced into the existing ground wires.
Navigation
[0] Message Index
[#] Next page
Go to full version