Main > Main Forum
Wiring 2 buttons to one IPAC/Keywiz input? Possible?
(1/2) > >>
Mattiekrome:
Hi all, did a quick search but came back with about a gazillion results, none which I found really useful... Anyways, long story short.  If I had a 2 player CP setup with 8 way sticks for both player one and player two, but also wanted to add a dedicated 4 way stick for pac-man, etc.  Would this be wired in line with the player one 8 way stick?  If so, I could have 2 seperate sticks (one 8 way and one 4 way) connected to the same terminals on the IPAC/Keywiz.  Would both sticks be active at all times?  Are there any drawbacks to this?  Which brings me to my original question...

Is it possible to wire multiple buttons to the same IPAC/Keywiz input?  Example, I am thinking of adding some buttons on the side of my CP to run VPIN, so could I just tap into the existing connections from other buttons to do this?  I would have my position 1 button on player one side also wired to the left flipper button on the cabinet left side.  Does this cause any issues with the way the interface handles powering the buttons? 
deadkenndys1105:
I think I know what your saying.  For example you wanna know if you can wire left on player one's eight way joystick and a four way joystick's left to the same spot on an I-pac.  You shouldn't have a problem doing that.  The only problem I see with it would be you (me :banghead:) messing up the wires and having to pull it all apart and redo it.
Jeff AMN:
Yeah, you can do that. I'm going to have my 4-way wired to the same inputs as one of my 8-ways. Also, my 4-way buttons will share inputs with one of my 8-way buttons. My 4th "Neo Geo" button will share with one of my standard six as well.

I think most people do this, don't they? Otherwise you'd use up your inputs fairly quickly.
fjl:
The problem would be that other people using the cabinet will not know what the 4 way is for and will decide to use the 8 way instead for all games. I was originally planning to get both an 8 way and a dedicated 4 way. But then I found out about the Ultra 360 sticks. They can do both and more.

But if you really want both sticks but want to turn one off for certain games then I would simply suggest getting an I-PAC4 as it has 54 inputs. Should be plenty.
Kevin Mullins:

--- Quote from: Mattiekrome on February 25, 2007, 12:57:48 am ---Is it possible to wire multiple buttons to the same IPAC/Keywiz input?  Example, I am thinking of adding some buttons on the side of my CP to run VPIN, so could I just tap into the existing connections from other buttons to do this?  I would have my position 1 button on player one side also wired to the left flipper button on the cabinet left side.  Does this cause any issues with the way the interface handles powering the buttons? 

--- End quote ---

You could wire 100 switches to the same input.
Just daisy chain the input lead the same as you do the ground side from one switch to the next.

The buttons aren't actually "powered", they are just a "make or break" contact switch.
Navigation
Message Index
Next page

Go to full version