| Main > Main Forum |
| Is it blasphemy to shun CP art? |
| << < (4/4) |
| FrizzleFried:
--- Quote from: Encryptor on February 25, 2007, 06:56:28 am --- --- Quote from: FrizzleFried on February 24, 2007, 10:26:41 am ---...looks like you routed your TB & joystick mounting plate and a little deep? Can you add a 2nd or 3rd piece of vinyl inside those holes to create less of a depression? The CP looks good minus those depressions. --- End quote --- Yeah I realized that after I had the vinyl & lexan installed. I thought it might pop up and stick to the lexan with static but I was wrong. Too much work at this point to de-wire all the buttons and pull it apart. Thats a project for when I decide to put a cpo on it which may cover those up anyway. Who knows. Thanks for the critique. Encryptor --- End quote --- The easiest way to deal with those depressions... Paint the underside of your lexan! That would hide any issues you have under it. I plan on doing the same with my horizontal cabinet CP when i next pull the plexi off. While my mounting plate is, in fact, flush, because there is a 1/16" or so gap around the plate, you can still see the damn square plate "impression" with this vinyl I used. One thing I DO like about using the vinyl though...when I installed it, I didn't cut out the joystick holes, I simply cut an "X" in the vinyl, creating a real nifty (and good looking) dust cover. |
| superbovine:
While we're talking recesses, i went to town with a little body filler, worked out awesome :) |
| SirPeale:
http://www.pealefamily.net/tech/newmame/index.php?cat=6 |
| Navigation |
| Message Index |
| Previous page |