Main > Main Forum
T-Stick Plus Help
destructor:
Connect wire' connectors (GND and RIGHT), without connect it to microswitch. Touch it.
Razor:
--- Quote from: BobA on February 24, 2007, 12:21:51 pm ---Since you have gone over the switches and the minipac multiple times and still have a problem with the right switch on the jstick you might want to check the wiring again. If you connected to the microswitch with connectors maybe the crimp has come loose and the wires are not making good contact. If you have a connector on the minipac end maybe a wire has come unseated there. To check from joystick to minipac you could use a dvm or multimeter to measure the continuity across the switch by measureing ohms between the connector pin that the right joy stick contact is on and ground.
Did you make your own cable or did you purchase the ultimarc cable?
--- End quote ---
Hi thanks for your reply, in between posting the last message and this one, I did a restart on the machine and now none of the inputs are working at all in notepad and further more using the cntrl alt p method I am now unable to program anything, its simply not recognising any buttons or movement to actually assign a key to it. I've looked over the wiring briefly but havent been able to find anything wrong, I dont have a multimeter here, but I can get hold of one and give it a thorough check soon though. I didnt make my own cables no, I brought the minipac with a wiring harness.
Razor:
Further update, unplugged the minipac and plugged in again, got all the buttons and joystick directions working again apart from the right still. Will still try the multimeter soon though.
destructor:
Touch (connect) GND and RIGHT connectors (these from microswitches). When you can move in game to right by touching these wires then it knows that wires are OK.
Razor:
--- Quote from: destructor on February 25, 2007, 04:48:06 am ---Touch (connect) GND and RIGHT connectors (these from microswitches). When you can move in game to right by touching these wires then it knows that wires are OK.
--- End quote ---
Hi im not sure ill be able to do that, as theyve got spade connectors on, the actualy wires themselves are inside the spade, will give it a try though.