Main > Main Forum
SF2 cab update
<< < (3/4) > >>
govee:
I checked the Main PC Board Layout against that of the one in the manual and they match. Also the numbers on the board match that of the one in there as well. Whew, now I definitely now I have a none working WG19K7602 in this case.
Fozzy The Bear:

--- Quote from: govee on February 18, 2007, 07:46:38 am ---I checked the Main PC Board Layout against that of the one in the manual and they match. Also the numbers on the board match that of the one in there as well. Whew, now I definitely now I have a none working WG19K7602 in this case.

--- End quote ---

Sorry???? How do you work that out???  I think you're getting a bit confused here. It's your power supply that's failed not nessesarily the monitor or the monitor board. There's probably nothing wrong with the monitor.


--- Quote ---I checked and there is 120v coming out of the transformer but the ps has no 12v or 5v coming out.
--- End quote ---

Until you get the power supply to the game board working properly you won't get anything on the monitor. Take this ONE step at a time. If you have no 5v or 12v coming out of the power supply then fix that first.

Best Regards,
Julian (Fozzy The Bear)

govee:
Sorry , that was misleading. I was really just trying to point out that I know which monitor is in this none working cab. I realize that it has 120V in from the transformer and that it also needs all the video inputs from the ROM PCB but it is receiving power from the dead PS. The next thing is to get a working PS.
skim36:
When I bought my SFII Dynamo cab...the manual was on the very bottom inside the cab...I might be able to find it for ya if interested.  I don't need it.

--skim36
govee:
Thanks for the offer Skim. I will let you know should I run in to isues that the manual could help with. For know I am going to do some cleaning and wait for the PS.
Navigation
Message Index
Next page
Previous page

Go to full version