Main > Main Forum

SF2 cab update

Pages: (1/4) > >>

govee:

I got the cab home last night and realized It says SF2 Championship Edition Turbo Hyper Fighting on the Marquee but the Side art says only SF2 Champ Ed and upon further review the board says only SF2. Is there a difference? Was it just a marketing ploy? Also when I turned on the cab the monitor came on for a couple seconds showed a red screen then went blank. The Marquee lights up but there is no sound. I checked and there is 120v coming out of the transformer but the ps has no 12v or 5v coming out. Here is some info from the cab. There is a placard on the back that says it is from ROMSTAR by DYNAMO, model number 02800500. The Monitor says Phillips A48ABK054

Here is a link with some pics.
http://akmd1.tripod.com/SF2.htm

Crowquill:

The marquee and sideart would be correct. SFII Champion Edition was initially sold only as a dedicated cabinet (similar Dynamo cab, grey speckly artwork). Later it was sold as a kit to convert other cabs. Judging from the Romstar sticker (and the cab itself), yours would be a conversion. After CE was out for a short time, they released Turbo as an upgrade to CE boards. This is why they would have still had Champion Edition sideart.

I'm not sure if there's an easy way to identify which board you have.

govee:

I found a sticker in the bottom of the cab that says this is a WG19K7602. Definetly no power out of the PS. THe power supply is a Peter Chou.

govee:

replaced blown fuse in PS and it blew the fuse for the transformer. Replaced the transformer fuse and left out the ps fuse and it is back to where it was. hmmm

Spaz Monkey:

I will gladly default to someone who has much more experiance than I, but it sounds like you only have juice going to the monitor, but not to the board.

Pages: (1/4) > >>

Go to full version