Main > Main Forum
RandyT, when are we getting the new 49-ways?
<< < (9/10) > >>
shorthair:

--- Quote from: AndyWarne on May 23, 2007, 06:34:50 pm ---Octagonal restrictors are currently in production for the UltraStik 360 for those who like a shorter throw. The injection molds have already been made, just waiting for actual molding.
Andy

--- End quote ---

How short?
AndyWarne:

--- Quote from: Aurich on May 23, 2007, 09:28:01 pm ---

--- Quote from: AndyWarne on May 23, 2007, 06:34:50 pm ---Octagonal restrictors are currently in production for the UltraStik 360 for those who like a shorter throw. The injection molds have already been made, just waiting for actual molding.

--- End quote ---

I get a % on those right? ;) The sad thing is my cab is still waiting for paint so you'll have the real thing ready to order before I've had much wear and tear on my hacked ones.

--- End quote ---
Yes, 100% hehe.

The octagonal restrictors measure 20mm across at the widest point. The regular round ones 22mm. For an exact angular measurement I will need to wait until they arrive unfortunately.

I received an email today asking why I did not name the UltraStik 360s a 4294967296-way stick as thats what they are! Well to be more accurate thats what they are "internally" before scaling and mapping. When sending to the PC they are a 65536-way stick.

Andy

shorthair:


--- Quote from: AndyWarne on May 23, 2007, 06:34:50 pm ---

The octagonal restrictors measure 20mm across at the widest point. The regular round ones 22mm. For an exact angular measurement I will need to wait until they arrive unfortunately.

I received an email today asking why I did not name the UltraStik 360s a 4294967296-way stick as thats what they are! Well to be more accurate thats what they are "internally" before scaling and mapping. When sending to the PC they are a 65536-way stick.

Andy



--- End quote ---

That's all I needed to know, Andy, thanks. And, not all permutations are non-trivial.
Aurich:

--- Quote from: AndyWarne on May 24, 2007, 03:29:27 pm ---The octagonal restrictors measure 20mm across at the widest point. The regular round ones 22mm. For an exact angular measurement I will need to wait until they arrive unfortunately.
--- End quote ---

That's from "corner" to "corner" right? Because the shaft won't go all the way into the corner, the diameter will meet resistance before that. So it's going to be effectively even shorter of a throw.

Are these based off of the ones I used for my hack or your own dimensions?
fjl:
All, right I'll get these 49 ways whenever they are available. For now I suppose I'll get some Super Joysticks to tide me over. Just wondering though, once I cut out the base for the Super Joystick, will these new 49 way sticks also be able to fit into the same base or will they be different?
Navigation
Message Index
Next page
Previous page

Go to full version