| Main > Main Forum |
| Countersink screws for joystick with 1/2 inch panel |
| (1/1) |
| mcdo15:
I searched and looked at serveral threads but didn't find an answer... I'm helping a friend with panel. He used 1/2 wood for the panel. Can i still countersink top screws so they don't show on the panel? I built a cab many years ago and kinda forgot what I did (i used 3/4 panel and i put the screw countered up top, a nut countersinked on the bottom, joystick, then washer/nut... This held up great and still works. can i do this with 1/2 inch? If drilled right, i can grab wood but not much. This is a Happ Competition Joystick Or should i just bolt though top? Me i don't want them showing and the person wanting it wouldn't even notice (kinda) Any advice for this would be great... TIA |
| leapinlew:
1/2" eh? I've countersunk joysticks with 5/8ths - seems plenty strong. I've also put some screws in from the bottom of the joystick into the wood. That also seems plenty strong. |
| Navigation |
| Message Index |