| Main > Lightguns |
| Making Light gun Removable(solved) |
| (1/6) > >> |
| AX:
Building on the info found here: http://www.angelfire.com/rebellion/anthony2600/cable.htm I am going to make my Lightgun removable. I am working on a plan where I will use his wiring info and slice an RJ45 connector onto the end of the gun's cable. This will make a nicer looking connection on the cabinet. Also, it CAN be done without soldering. I will write up a full tutorial after I complete the project fro anyone who is interested. |
| Sasquatch!:
If/when Act-Labs finally gets off of their butts and makes an S-Video TV-out lightgun, I plan on doing almost exactly what you're talking about (I was even thinking of using RJ45s too). So YEAH, I'd like to hear your plan of attack. :) |
| anthony691:
I would like the tutorial when you make it (to put on the site, if its alright with you; of coarse I will give you credit ect.) It is always good to have overlapping info to avoid situations liked mixed Lightgun w/ arcade monitor results. E-Mail it to me @ anthony11282600@hotmail.com I look forward to seeing it. |
| Jakobud:
--- Quote from: Sasquatch! on April 04, 2003, 10:00:48 pm ---If/when Act-Labs finally gets off of their butts and makes an S-Video TV-out lightgun, --- End quote --- Well it just so happens that these are in production as we speak simply because so many of us on this board supported Act-Labs to make them. |
| Amra:
I was actually considering using Cat5 or Cat9 instead, depending on how many wires are needed.... |
| Navigation |
| Message Index |
| Next page |