Software Support > DOS/WinCab

controling PC

<< < (2/2)

Karaokedude:
OK Managed to get it working on 2 laptops
so yes it works
you have to disconect from main network manually and then connect to the ADHoc

as the jukebox will only have the ADHoc network isnt really a problem

data encryption is a bit of a pain to setup as for some reason it decides its unsecured even when set

for anyone else thinking off setting it up leave the encryption off and get it working first then add the WEP key after

wincab seems to run fine with VNC although the screen on the remote takes a while to refresh

Kevin Mullins:

--- Quote from: Karaokedude on February 09, 2007, 08:22:48 pm ---wincab seems to run fine with VNC although the screen on the remote takes a while to refresh

--- End quote ---

So you had full keyboard and mouse support while running WinCab from the remote PC?

The las program I tried using for this purpose seemed to work great...except.... it had no keyboard support, so I couldn't do much with Wincab once it started, everything in Windows worked fine though. Chris explained to me a little bit about why it wasn't working, but it was over my head and was more to do with the way the remote controlling software was written, so I had to ditch that effert. (AnyPlace Control I think is what it was called)
I'll have to try VNC out.

Navigation

[0] Message Index

[*] Previous page