Main > Main Forum

U360 problem

Pages: (1/2) > >>

squirrellydw:

I emailed Andy, but I thought I would ask here also.

I seem to have a problem with at least one maybe two u360s.  I upgraded the firmware from 1.5 to 1.7 on all four u360s.  Now one is not working at all, it was before.  Any idea? 

The other three work fine except one has a small issue.  They all have the circular restrictor on and two of the three go in a circle when I test them, the other one goes in a square and hits the corners.  Any idea?

Thanks

fatfingers:


--- Quote from: squirrellydw on January 30, 2007, 10:16:28 pm ---I emailed Andy, but I thought I would ask here also.

I seem to have a problem with at least one maybe two u360s.  I upgraded the firmware from 1.5 to 1.7 on all four u360s.  Now one is not working at all, it was before.  Any idea? 

The other three work fine except one has a small issue.  They all have the circular restrictor on and two of the three go in a circle when I test them, the other one goes in a square and hits the corners.  Any idea?

Thanks

--- End quote ---

I have no idea why one would have stopped after the firmware update.

As for the oddball square one...do you have a different map applied to that joystick?  Like the two that are working have the analog map applied and the one that is square has some sort of diagonal 4-way map?

 :dunno



Donkey_Kong:

I'm going to suggest re-assinging id's to them all in the ultra utility. This might take care of it.

Let us know.  :cheers:

squirrellydw:

They all have the analog map, I doubled checked that and even changed it than changed it back.

Here is what I just noticed, the one that is not working doesn't even have the light on when its pluged in.  The other one that has other issue the light seems to blink.

I did try re-assinging the IDs and that didn't work

rockin_rick:

I remember reading a post on here about this sort of thing when his were upgraded to 1.7.  I can't seem to find it right now.  Perhaps you could search around a bit...

Good luck,
Rick


Pages: (1/2) > >>

Go to full version