Main > Main Forum
arcade monitor, need help
<< < (2/4) > >>
steptoe:
not sure wha tthe chassis is, heres some pics

thanks for ya help

steptoe:
heres another one
grantspain:
this pretty straight forward,if its jamma then the following is correct
green to pin n
blue to pin 13
red to pin 12
white(sync) to pin p
black(ground) to pin 14
if you do not have a pin in 14 then remove pin 2 and place in position 14,although i am pretty sure as long as the video ground goes to a ground then that is correct
steptoe:
could someone confirm where the 5 wires should go into the jamma harness. Above is where they currently are going, but something looks sus.

Any help guys

cheers

step
steptoe:
Grant

Thanks for the info, ill go have a play, fingers crossed

thanks again guys
Navigation
Message Index
Next page
Previous page

Go to full version