Main > Main Forum
arcade monitor, need help
steptoe:
Guys
I have an old cab that when i turn it on the screen works but nothing comes up. There is a plug with 5 wires from the chassis to the jamma harness, i assume its to transfere the image from the pcb tp the monitor. I looked up jamma wiring and its says a cable needs to go to No14 on the harness, there is no wire in No14. Got me stuffed, (maybe its a different harness ??)
Any help guys would be great. Thanks
CheffoJeffo:
A pic would be very helpful.
What game is in the cab ? How many pins ?
If JAMMA, 14 is video ground and is required. If you have 5 video wires coming from the harness, what pins ARE they coming from ?
Cheers
steptoe:
thanks for the reply
the game is super ranger
these are where the cable are going into the harness
green - L
black - 2
white - m
red - 12
blue - 13
heres some pics
steptoe:
1 more pic
spacies:
What chassis do you have?
The bottom photo is the RGB, sync and ground that connect to the Chassis from the game PCB.