| Main > Main Forum |
| arcade monitor, need help |
| (1/4) > >> |
| steptoe:
Guys I have an old cab that when i turn it on the screen works but nothing comes up. There is a plug with 5 wires from the chassis to the jamma harness, i assume its to transfere the image from the pcb tp the monitor. I looked up jamma wiring and its says a cable needs to go to No14 on the harness, there is no wire in No14. Got me stuffed, (maybe its a different harness ??) Any help guys would be great. Thanks |
| CheffoJeffo:
A pic would be very helpful. What game is in the cab ? How many pins ? If JAMMA, 14 is video ground and is required. If you have 5 video wires coming from the harness, what pins ARE they coming from ? Cheers |
| steptoe:
thanks for the reply the game is super ranger these are where the cable are going into the harness green - L black - 2 white - m red - 12 blue - 13 heres some pics |
| steptoe:
1 more pic |
| spacies:
What chassis do you have? The bottom photo is the RGB, sync and ground that connect to the Chassis from the game PCB. |
| Navigation |
| Message Index |
| Next page |