| Main > Main Forum |
| iPac wiring problem |
| (1/1) |
| brianoneill:
Guys, I rewired my CP this weekend but have run into a snag. Its a 28 input iPac. I have always needed 32 inputs because of an extra joystick (a 4 way). This was solved before by doubling up the P1 U/D/L/R inputs with the 8 Way & 4 Way joysticks. But now I have rewired its not working like that !? If I double up the J8Way Up with the J4Way .. they don't register anything !? If I either of them have the iPac to themselves they work fine. Anyone any ideas why this is ? I am sure I had this working before :( |
| CheffoJeffo:
Ground problem ? There is no problem running a 4-way and 8-way from the same inputs, but it sounds like you have a grounding issue. Cheers |
| needlesmcgirk:
I have the player 1 8-way joystick wired with the dedicated 4-way on my panel into the same inputs on my ipac card, so it does work. You should just double check the wiring and see if something is missing. |
| brianoneill:
:tool: Yes I am indeed ! I had the joysticks cherry switches wired to the NC ! It was dark :dunno Thanks guys & sorry for the stupidity ! |
| Navigation |
| Message Index |