| Main > Main Forum |
| I'm so terribly confused!!! (ArcadeVga + ipac/jpac) |
| (1/2) > >> |
| sphetr2:
I thought I knew exactly what to do until I went to the Ultimarc website. I was just going to get an ArcadeVGA + ipac for my JAMMA cab (i'm not actually using the Jamma controls). But Utlimarc says "you need a video amp nyar nyar nyar!!!" So. Is this true? If so, should I get a jpac instead of an ipac? Or do i not need amplification? Also, will jpac support more than 3 buttons per player? Cause last time I checked that was JAMMA's limit (not sure though- and not sure if that translates to the jpac). Thanks. |
| CheffoJeffo:
VideoAMP -- I hve never needed one (well, not sure for some since I used J-Pacs), but know people who have (and bought the ones I previously ordered). When in doubt, tell Andy what kind of monitor you have. The J-Pac "supports" 8 buttons per player (buttons 4-8 on screw terminals). http://www.ultimarc.com/jpac1.html Cheers. EDIT: FWIW, if you have an intact JAMMA harness, I would choose a J-Pac over an I-Pac2 everytime. |
| meltman:
Which monitor are you using? |
| sphetr2:
--- Quote from: meltman on January 25, 2007, 05:34:59 pm ---Which monitor are you using? --- End quote --- I don't know, it came with the machine. Machine is 'Air Buster.' --- Quote from: CheffoJeffo on January 25, 2007, 05:33:13 pm ---EDIT: FWIW, if you have an intact JAMMA harness, I would choose a J-Pac over an I-Pac2 everytime. --- End quote --- But what if I don't want to use the original JAMMA controls? |
| SirPeale:
--- Quote from: sphetr2 on January 25, 2007, 08:44:35 pm --- But what if I don't want to use the original JAMMA controls? --- End quote --- Why not? What *do* you want to use? |
| Navigation |
| Message Index |
| Next page |