| Main > Main Forum |
| Just got a 27" bezel, have a question |
| (1/1) |
| needlesmcgirk:
So I just picked up this thing, its a Happs 27" bezel for standard (curved) monitors. I will be using a 27 inch curved tv as the monitor. Is this thing going to fit ok or am I going to need to take the casing off the tv? And how you you guys typically keep these things in place? thanks so much for your help. |
| acevedor2:
Completely depends on the TV. That said, it should fit with the case on. As far as retaining them, most people use screws and/or wood strips, since you usually put plexi or glas on top of it. |
| bvicarious:
See this thread: http://forum.arcadecontrols.com/index.php?topic=60561.msg599201 |
| BamBam:
I have a flat screen monitor and was able to resolve the problem by using a router. I secured my bezel to a flat working surface facing up. I then used a router with a slot cutter and carefully cut the curved surface away, which left me a flat surface to mount against my flat screen monitor. I lightly sanded the newly cut area until is was smooth. If your T.V. has a slight curve that does not match your bezel, you will have to create a template of the curve and transfer it to your bezel for trimming. John |
| Navigation |
| Message Index |