| Main > Main Forum |
| UltraStik 360 problem |
| (1/2) > >> |
| NemX2:
Recently replaced my happ ulimates with 2 ultrastik 360's and love them. The problem I have with one of the sticks is it will only work up/down. Even with pushing a 8-way or 4-way map will result in the same. The only thing that looks different from the working stick is the led on the non-working stick is flashing. I sent a e-mail to andy @ ultimarc, but was wondering if anyone else has had this problem. thanks |
| Donkey_Kong:
--- Quote from: NemX2 on January 17, 2007, 01:19:42 pm ---Recently replaced my happ ulimates with 2 ultrastik 360's and love them. The problem I have with one of the sticks is it will only work up/down. Even with pushing a 8-way or 4-way map will result in the same. The only thing that looks different from the working stick is the led on the non-working stick is flashing. I sent a e-mail to andy @ ultimarc, but was wondering if anyone else has had this problem. thanks --- End quote --- Well have no fear. Andy will solve your issue one way or another I'm sure!! :cheers: |
| fatfingers:
What is your firmware version? |
| NemX2:
Updated to 1.7 just in case, but no change. |
| NemX2:
Andy responded. He is sending a replacement PCB. Whoot! Can't wait to have two of these working. Best joystick I've used ever in my cabs. |
| Navigation |
| Message Index |
| Next page |