Main > Main Forum
Gottlieb Coin Door Question *Rear Pic Added*
Encryptor:
Just curious to know if you can use any coin mechs with this coin door or if it's like a coin controls door that will only work with it's own mechs. Thanks.
**Edit - Added a pic of the back.
**Edit - Another Question
Could this be hooked up in a mame cabinet and work?
Encryptor
deadkenndys1105:
I donno. Post a picture from the other side. I know I can swap my millipede and happ stuff.
Ken Layton:
That's a genuine American made by Gottlieb coin door. It will accept any American made coin mech/chute such as Coin Acceptors (a.k.a. Coinco), Coin Mech, National, etc. Foreign made ones like Happ/Ashai Seiko don't have the lockout wire holes in the correct place and the coin lockout will jam. Coin Controls will NOT work in this door.
Encryptor:
Bump - Added another question.
Ken Layton:
No, this door uses 24 volts to operate the coin lockout coils. No power to the lockout coils = no coin acceptance. Also this door uses out-in-the-open leaf switches with silver contacts. Not good for low voltage low current applications such as mame.
Another thing is the back of that door looks awfully corroded too.