Main > Main Forum
Gottlieb Coin Door Question *Rear Pic Added*
(1/2) > >>
Encryptor:
Just curious to know if you can use any coin mechs with this coin door or if it's like a coin controls door that will only work with it's own mechs. Thanks.

**Edit - Added a pic of the back.
**Edit - Another Question

Could this be hooked up in a mame cabinet and work?

Encryptor
deadkenndys1105:
I donno.  Post a picture from the other side.  I know I can swap my millipede and happ stuff.
Ken Layton:
That's a genuine American made by Gottlieb coin door. It will accept any American made coin mech/chute such as Coin Acceptors (a.k.a. Coinco), Coin Mech, National, etc. Foreign made ones like Happ/Ashai Seiko don't have the lockout wire holes in the correct place and the coin lockout will jam. Coin Controls will NOT work in this door.
Encryptor:
Bump - Added another question.
Ken Layton:
No, this door uses 24 volts to operate the coin lockout coils. No power to the lockout coils = no coin acceptance. Also this door uses out-in-the-open leaf switches with silver contacts. Not good for low voltage low current applications such as mame.

Another thing is the back of that door looks awfully corroded too.
Navigation
Message Index
Next page

Go to full version