| Main > Main Forum |
| New leaf-switch project - I need your help |
| (1/2) > >> |
| benarcade:
I want to put together a leaf-switch console and have quite a few questions. It appears that the switches, at least, are sold in separate parts - is that right? Looking at Bob Roberts' site, it looks like there are several parts to a button: * Button $1 * Pal Nuts $1 * Leaf Switch & Holder $3 * Spacers $1 So I need to buy 4 different items to get a single leaf-switch button? Also, which is better, the nylon or fiberboard? If I want to install the buttons in a 3/4" wood board, do I need the "short" or "long" buttons? - I'm assuming the "long" ones. Do I need a leaf switch with a resistor? What does the resistor do? Here's my shopping list at http://therealbobroberts.net/parts.html. Am I missing anything? * 2 Red Ball 4/8 Way Leaf Joystick = $20.00 [One for 8-way, and one for 4-way] * 1 White player 1 & 2 pushbutton set = $3.50 [These don't need to be leaf] * 9 Leaf sw & holder only for wood CPs Gold Flashed Contacts $27.00 [Switches with holder] * 2 Leaf sw pal nuts (Needed for above holders!) = $2 [10 total nuts] * 9 Leaf button only long (4 gold, 2 red, 1 green, 2 blue) = $9 [Green for coin]Total = $61.50 Then I need an I-PAC2 from ultimarc, some wires and connectors, wood. Total should be somewhere around $100. IPAC2 question: I see that it has PS/2 keyboard in/outs. They don't specifically say how to plug it into the USB - so I assume it comes with a standard ps/2 to usb converter? I'm gunshy now that I've experienced the incompatibility of x-Arcade with standard USB converters. And here's a quick mockup of the layout: |
| Encryptor:
There is another alternative that will still allow you to use leaf switches. It is a new style that ponyboy is selling in the Buy/Sell/Trade forum here. http://forum.arcadecontrols.com/index.php?topic=36770.0 Go to this thread, scroll down and look at the 4th picture down. It's a green Happs button with a new leaf style bracket. Just something to consider. Encryptor |
| Encryptor:
Oh and I forgot to put this in. The bracket leaf switches are 2.15 each and what ever the button minus the micro switch cost. Around 1.50 or so. It's a bit cheaper than the way you were looking at doing it. Encryptor |
| whammoed:
If putting in 3/4" material, you won't need the spacers, just the holders with long buttons. You can use the short buttons without the holder though, just screw the leaf switches directly to the 3/4" material. |
| Level42:
Do NOT buy that joystick ! It's rubbish: http://forum.arcadecontrols.com/index.php?topic=41573.0 Also don't buy the leaf switches that Bob Roberts indicates as IMPORT, those are the same "quality" leafs as used on that joystick. I can't understand why Bob is selling these....a man with such experience in the business should know better. Indeed, getting the leafs that Ponyboy sells is a much better option. There is no real good alternative for a good quality new joystcik. You'd have to be very lucky to find an original Wico leaf joystick on e-bay or something. If you hate microswitches like me, I suggest the Suzo Inductive sticks. http://forum.arcadecontrols.com/index.php?topic=42066.0 and http://forum.arcadecontrols.com/index.php?topic=53719.0 if you don't like the looks. $17,95 each at www.tntamusements.com. Ultimarc also has a great new stick that doesn't use either microswitches or leafs: http://www.ultimarc.com/ultrastik_info.html |
| Navigation |
| Message Index |
| Next page |