| Main > Main Forum |
| First MAME cabinet build - buy or build controls |
| << < (2/4) > >> |
| TOK:
I agree with Quarterback... If you have to buy something, make it the gutted cab. Wiring the CP is very easy with an encoder. The reason I suggest building is that you're either going to want to add stuff, or start on a second cab right away. I made 3 different panels for my first cab before I was happy with it, even though the layout wound up being pretty basic. Its experience you will use again and again. |
| rlemmon:
I can't stress enough that x arcades are junk. Cheap pcb's and controls. You really should try building your own. If you don't want to i would say your best bet is to buy a hanaho hotrod. They use real happs parts rather than cheap knockoffs and you can get the 2 player unit for $100.00, Ron :) http://www.hanaho.com/Products/HotRodJoystick.php |
| GameOver:
The best advice I can give you is send me all your money now. You'll thank me later. You're welcome. |
| jWin:
personally im considering buy the "ready-to-assemble" control panel for $105 shipped at mameroom.net, it comes with t-molding installed and has the nice black melamine finish, all you have to do is buy the PCB(i-pac) and wire/buttons/joysticks. And you could always add onto it yourself, drill some extra button holes, etc. Or you could have a custom one made but it costs $100 extra. Check out http://www.retroblast.com/reviews/mrdesign2.html to get a general idea of how the quality looks. and http://www.mameroom.com/uacontrolpanel_info2.asp |
| Kremmit:
X-Arcade is selling empty, but pre-assembled and drilled control panels awfully cheap right now. Buy one of those and add controls, wires, and encoder. |
| Navigation |
| Message Index |
| Next page |
| Previous page |